{{ variable.name }}

The larger TG-LW-SV build: a 120 L metering bin and Φ159 mm vibrating discharge chute, weighed by two FSSB-100 kg sensors with an HD-ZL150 linear vibrator.
This configuration of the TG-LW-SV uses the 120 L metering bin with the Φ159 mm vibrating discharge chute. Material is released by vibration, weighed by two FSSB-100 kg high-precision sensors and corrected in real time, so the feeder holds a gravimetric set point instead of a volumetric one.
The larger bin gives a longer working inventory before refilling, which suits lines that run long campaigns between material changes. Contact parts are SS304 and the hopper support is Q235-A, painted RAL 5003. Continuous loss-in-weight metering and intermittent loss-in-weight batch metering are both available, and the unit is used with glass fibre, carbon fibre, crushed material and highly abrasive materials.
A 120 L metering bin extends the interval between refills on long production campaigns, with a 5 L collecting hopper below.
The wider vibrating discharge chute option is driven by the HD-ZL150 linear vibrator; the regulating port above it is Φ168 mm.
Two FSSB-100 kg high-precision sensors carry the bin so the feed rate tracks real mass loss.
Used for glass fibre, carbon fibre, crushed material and highly abrasive materials where volumetric feeding drifts.
Continuous loss-in-weight metering or intermittent loss-in-weight batch metering from the same feeder.
A cloud management platform can be matched for remote monitoring of feed rate, weight data, equipment status and alarms.
| Parameter | Value |
|---|---|
| Model series | TG-LW-SV100 / TG-LW-SV130 / TG-LW-SV160 |
| Metering bin | 120 L (80 L option available) |
| Collecting hopper | 5 L |
| Hopper support | Q235-A |
| Discharge chute regulating port | Φ168 mm |
| High precision sensor | FSSB-100 kg x 2 |
| Linear vibrator | HD-ZL150 |
| Vibrating discharge chute | Φ159 mm (Φ102 mm option available) |
| Material-contact parts | SS304 |
| Environment temperature | 0-40 °C |
| Material temperature | 0-50 °C |
| Paint colour | RAL 5003 |
Standard parameters are shown. Additional loss-in-weight feeder configurations can be specified according to the material characteristics and process requirements.
The feeder series comprises TG-LW-SV100, TG-LW-SV130 and TG-LW-SV160. Two metering bin volumes (80 L and 120 L) and two vibrating discharge chute diameters (Φ102 mm and Φ159 mm) are listed; this page covers the 120 L bin with the Φ159 mm chute. An optional electrical explosion-proof function and RAL 5003 paint complete the standard offer.
All material-contact parts are SS304, including the 120 L metering bin and the Φ159 mm discharge chute. The hopper support is built from Q235-A and painted RAL 5003. The bin is carried on two FSSB-100 kg sensors, the HD-ZL150 linear vibrator drives the chute, and a 5 L collecting hopper is mounted below the discharge path.
Compounding plastics, chemicals, building materials, food, new energy and medical production. Frequent duties are automatic food batching, colour-masterbatch and modified-plastics ingredient metering, continuous feeding in extrusion, and ratio control with continuous conveying in chemical and building-material processes.

Typical line position for a high-inventory metering duty
Parameters listed here are standard. Configurations beyond them are specified against material characteristics and process requirements, and special requirements are handled through customised design with fast response. The optional electrical explosion-proof function and the cloud management platform are quoted per project.
Over one year, 200 units were supplied to compounding plastics, food and chemical producers on the global market. Applications included automatic food batching, colour-masterbatch and modified-plastics metering, continuous feeding in extrusion, and ratio control in chemical and building-material processes. The reported outcome was automated batching, more stable formula control and improved production efficiency.
The 120 L bin holds a larger working inventory, so refills are less frequent on long runs. The choice is confirmed against the material characteristics and process requirements of your line.
Both Φ102 mm and Φ159 mm are listed. This page covers the Φ159 mm version; the regulating port above the chute is Φ168 mm in both cases.
Two FSSB-100 kg high-precision sensors support the metering bin, so the control loop works from mass loss over time.
Yes, continuous loss-in-weight metering and intermittent loss-in-weight batch metering are both supported.
The feeder is used with glass fibre, carbon fibre, crushed material and highly abrasive materials, all in contact with SS304 surfaces.
Standard environment temperature 0-40 °C, material temperature 0-50 °C.
The factory is certified to ISO 9001 (38524UQN0DP2R0S) and ISO 14001 (38524UE640TRR0S) for loss-in-weight feeder design, manufacturing and sales. A CE Verification of Conformity (ICR/VC/HFG260828) covers the solid loss-in-weight feeder range; we confirm the model scope for your configuration on request.
Tell us your material, bulk behaviour and required feed range and we will confirm the bin and chute combination. Transcell Intelligent Machinery (Changzhou) Co., Ltd., Building 9, No.9 Caoxi Road, Niutang Town, Wujin District, Changzhou City, Jiangsu Province, China.
E-mail: info@transcellgroup.com · Tel: +86 400-068-3777 · WhatsApp: +852 6952 8737 · Website: www.transcellgroup.com
vibrating-loss-in-weight-feeder-tg-lw-sv130-120l-bin-front.png — Alt: 120 L metering bin version of the vibrating loss-in-weight feeder
vibrating-loss-in-weight-feeder-tg-lw-sv130-phi159-chute.png — Alt: Φ159 mm vibrating discharge chute with HD-ZL150 vibrator fitted
vibrating-loss-in-weight-feeder-tg-lw-sv130-hopper-detail.png — Alt: 5 L collecting hopper and Q235-A support frame detail
vibrating-loss-in-weight-feeder-tg-lw-sv130-line-installation.png — Alt: Feeder with 120 L bin installed above an extrusion feed throat